HP Integrity rx1600 Operation and Maintenance Guide

Chapter 9
181
9 Specifications
This chapter provides the power requirements, physical requirements, and hardware specifications required for normal
operation of the HP Integrity rx1600.
NOTE For information on operating conditions (environmental requirements), see the hp Integrity rx1600 Site
Preparation Guide included on the HP Server Documentation CD-ROM, or posted under the rx1600 Server at
http://docs.hp.com.
Hardware Specifications
Table 9-1 Hardware Specifications
Micro-processors Intel® Itanium® (up to 2 processors).
1.0 GHz/1.5MB.
Memory Supports up to eight Double Data Rate (DDR) registered ECC Memory, in PC1600 DIMMs.
Supported DDR DIMM sizes: 128MB, 256MB, 513MB, 1GB, and 2GB. Requires DIMMs to
be added in pairs of equal capacity.
SCSI Integrated Ultra-3 SCSI dual channel controller; 80 MB/s transfer rate with one internal 68-pin
connector (channel A) and one external 68-pin connector (channel B).
LAN 10Mb/100Mb/1Gb LAN (RJ-45) fast ethernet controller; with Wake-on-LAN enabled/disabled
via BIOS setup.
PCI Slots Two 64-bit PCI-X slots, 133 MHz, 3.3V slots. One full slot and one half slot.
Core I/O One serial port, 2 USB 2.0 ports, integrated 10Mb/100Mb LAN (RJ-45), 2 PCI-X slots, 2 SCSI
channels and 1 IDE bus.
DVD-ROM IDE interface; 48x speed.
Mass Storage Maximum internal storage: two 146GB, 10K RPM drives.
External Storage Optional.
Power Supply 400W power supply.