HP Integrity rx1600 Operation and Maintenance Guide

Event, Error, and Warning Messages
EFI Error and Warning Messages
Appendix B
196
SEL and FPL Log Entries
This section is a quick reference for the intelligent platform management interface (IPMI) events recorded in the SEL and FPL
files. These logs are available via the management processor (MP) card interface or the BMC command line interface (CLI).
• All entries from the SEL are forwarded to the FPL. The FPL is a circular log so the newest entries replace the oldest. The
FPL contains forward progress messages from the BMC, System firmware, EFI, and the OS.
• The SEL will not accept new entries once it is full and contains only those events considered of major importance to
system operation.
• Both contain type 02 and E0 messages.
• A triplet is formed from the SensorType, EventType, and the lower nibble of the Data1 fields of Type 02 events. MP
firmware displays the triplet in the Keyword field.
NOTE Systems with firmware version 2.0 or higher also have a clearlogs command that will clear out the log
files should they become full.
Accessing the logs with BMC CLI commands
The cli>sl -f command displays the forward progress log. For example:
Rec# Sev Generator/Sensor Description Event ID Data, Timestamp
-------- - ---------------- ------------ ----------- --------------------------
00000000 - BMC Chass cntrl 00-12:70:A3 81:03 2003-10-31 22:41:29
00000002 - BMC LPC reset 00-12:70:02 2003-10-31 22:41:30
00000003 - ACPI State S0 (on) FA-22:6F:00 2003-10-31 22:41:31
00000004 - Fan 1 (PSU) OK 11-0A:07:00 2003-10-31 22:41:31
00000005 - Fan 2 (Mem) OK 12-0A:07:00 2003-10-31 22:41:31
00000006 - SFW Boot start 00-1D:0A:00 2003-10-31 22:41:32
00000007 2 CPU1 Boot start 00063 DT 04 0000000000000000
00000008 2 CPU1 Boot start 00063 Time 2003-10-31 22:41:32
00000009 0 CPU1 00020 DT 00 0000000000000000
58 Checksum error accessing FRU information Replace the FRU which was reported. If the error
message is repeated, contact the HP Support
center for assistance.
59 FRU information version error Replace the FRU which was reported. If the error
message is repeated, contact the HP Support
center for assistance.
Table B-1 EFI Error and Warning Messages (Continued)
Error
Number
Error/Warning Message Solution