Manualshelf

HP Integrity rx1600 Operation and Maintenance Guide

ManualsBrandsHP ManualsServerHP Integrity rx1600 Server
11121314151617181920
Chapter 2
Controls, Ports and Indicators
Rear Panel
20
• Optional Management Processor Card LAN
• PCI Slots 1 and 2
Figure 2-5 Rear View
Table 2-4 Rear Panel Connectors and Switches
Connector/Switch Function
AC Power Primary power connection for the server
LVD/SE SCSI 68-pin, low-voltage differential, single-ended U320 SCSI. This connector provides external
SCSI connection on SCSI Channel B.
10/100/1000 LAN 10/100/1000 base-T ethernet LAN connector
10/100 LAN 10/100 base-T ethernet LAN connector Wake-on-LAN, Alert-on-LAN capabilities
Serial 9-pin male serial connector — this is the console connector is the optional management
processor card is not installed.
USB Two Universal Serial Bus (USB 2.0) connectors
ToC Transfer of Control button. Halts all system processing and I/O activity and restarts the
computer system.
Locator Button and LED The locator button and LED are used to help locate a server within a rack of servers. When the
button is engaged, the blue LED illuminates and an additional blue LED on the front panel of
the server illuminates. This function may be remotely activated.
Video (optional) 15-pin female video connector for the optional management processor card
Serial (optional) 25-pin female serial data bus connector for the optional management processor card
10/100 LAN (optional) 10 Mb/100 Mb LAN connector for the optional management processor card