HP Integrity rx1600 Operation and Maintenance Guide

Chapter 5
Utilities
Extensible Firmware Interface (EFI) Boot Manager
53
EFI Commands
Table 5-1 lists EFI commands for the hp Integrity rx1600 Server. The equivalent BCH commands found in PA-RISC based
systems are also listed.
Table 5-1 EFI Commands
EFI Shell Command
BCH Command
Equivalent
(PA-RISC)
BCH Command Parameters (PA-RISC) Definition
These commands are found in all other menus
info boot Boot [PRI|HAA|ALT|<path>] Boot from specified path
help <command> HElp [<menu>|<command>] Display help for specified
command or menu
reset RESET Reset the system (to allow
reconfiguration of complex
exit (at EFI shell) MAin Return to the main menu
MAin
EFI boot manager
“change boot order”
PAth [PRI|HAA|ALT|CON|KEY|<path>] Display or modify a path
bcfg SEArch [ALL] Search for boot devices
bcfg SEArch [DIsplay|IPL] [<path>] Search for boot devices
many commands
offer a [-b] parameter
to cause 25 line
breaks
ScRoll [ON|OFF] Display or change scrolling
capability
COnfiguration
autoboot AUto [BOot|SEarch|STart] [ON|OFF] Display or set the auto start
flag
info boot BootID [<processor #>[<bootid #>]] Display or set processor boot
identifier
EFI boot manager Boot info Display boot-related
information
autoboot BootTimer [0-200] Seconds allowed for boot
attempt
cpuconfig CPUconfig [<proc>][ON|OFF]] Config/deconfig processor
boottest FastBoot [ON|OFF] or [test] [RUN|SKIP] Display or set boot tests
execution
date Time [cn:yr:mo:dy:hr:mn[:ss]] Read or set the date
time Time [cn:yr:mo:dy:hr:mn[:ss]] Read or set the real time
clock