HP Integrity rx1600 Operation and Maintenance Guide

Chapter 5
Utilities
EFI/POSSE Commands
54
EFI/POSSE Commands
This section describes the EFI/POSSE commands developed for the server.
INformation
info all ALL Display all system
information
info boot BootINfo Display boot-releated
information
info cpu CAche Display cache information
info chiprev ChipRevisions Display revision number of
major VLSI
MP command <df> FRU Display FRU information
info fw FwrVersion Display firmware version for
PDC, ICM, and complex
info io IO Display firmware version for
PDC, ICM, and complex
lanaddress LanAddress Display core LAN station
address
info mem Memory Display memory information
info cpu PRocessor Display processor
information
SERvice
errdump clear CLEARPIM Clear (zero) the contents of
PIM
mm MemRead <addr> [<len>] [<type>] Read memory locations
scope of page deallocation
pdt page deallocation
table (pdt)
Display or clear the page
deallocation table
errdump mca
errdump cmc
errdump init
processor internal
memory (PIM)
[<proc>] [HPMC|LPMC|TOC|ASIC]] Display PIM information
Table 5-1 EFI Commands (Continued)
EFI Shell Command
BCH Command
Equivalent
(PA-RISC)
BCH Command Parameters (PA-RISC) Definition