HP Integrity rx1600 Operation and Maintenance Guide

Chapter 5

Utilities

EFI/POSSE Commands

Selftest Setting

---------- --------------

early_cpu Skip this test

late_cpu Run this test

platform Run this test

chipset Run this test

io_hw Run this test

mem_init Run this test

mem_test Run this test

lanaddress

Allows the user to display the core I/O MAC address.

Syntax:

lanaddress

Parameters

none

Example 5-15 lanaddress Command

LAN Address Information:

LAN Address Path

----------------- ----------------------------------------

Mac(00306E4C4F1A) Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E4C4F1A))

*Mac(00306E4C0FF2) Acpi(HWP0002,100)/Pci(2|0)/Mac(00306E4C0FF2))

monarch

Displays or modifies the ID of the bootstrap processor. The preferred monarch number is stored in NVM.

Syntax

monarch <cpu>

Parameters

<cpu> specifies a cpu

Operation

If specified with no parameters, monarch displays the Monarch processor for the system. Specifying a processor number

alters the preferred Monarch processor. None of these changes takes affect until after a reboot.

Example 5-16 monarch Command

Shell> monarch

Current Preferred

Monarch Monarch Possible Warnings

------- --------- -----------------