HP Integrity rx1600 Operation and Maintenance Guide

Chapter 5

Utilities

Specifying SCSI Parameters

TIP To move the cursor in the EFI SCSI Setup Utility, you can use these keys:

• Arrow keys:

 

• Alternate keys:

H = left

J = down

K = up

L = right

I = home

O = end

Move the cursor to highlight the channel of the SCSI interface; press

Enter. (To determine which channel of the

interface to highlight, match the PCI Bus, PCI Dev, and PCI Func values on this screen to the Bus #, Dev #,

and Fnc # values from the info io command.)

CAUTION Do not select the <Global Properties> option on the main menu.

Step 6. The “Adapter Properties” screen for this channel of the SCSI interface is displayed. If you like, you can make sure

the utility is running for the channel of the SCSI interface by comparing the values shown for PCI Bus,

PCI Device, and PCI Function to the Bus #, Dev #, and Fnc # values from the info io command.

CAUTION Do not change the value for any of these fields on the “Adapter Properties” screen:

• Auto Termination

• SCSI Parity

• SCSI Bus Scan Order

• Spinup Delay (Secs)

Changing any of these fields can cause unpredictable results.

CAUTION Do not change the value for any of these fields on the “Device Properties” screen:

• Scan Id

• Scan LUNs > 0

• Disconnect

• SCSI Timeout

• Queue Tags

• Format