hp Server Shipping Bracket Installation

3
Figure 5. Securing the Front Main Bracket
4. Install two M5 screws through the rear main bracket into the threaded inserts on the rear side brackets shown in
Figure 6. Tighten all screws.
Figure 6. Securing the Rear Main Bracket
5. Tighten the M5 screws securing the rear side brackets installed in Step 2.
6. Install outer slide rails to the rack as shown in Figure 7. Install the inner slide rails to the server chassis. Follow
procedures in the hp Installation Guide, Mid-Weight Slide Kit (5065-7291).
Figure 7. Server Rail Installation
7. Place two spacers on top of the support bracket as shown in Figure 8.