Installation Guide, Second Edition - HP Integrity rx1600

Chapter 3

Installing and Configuring

Rear Panel

The hp Integrity rx1600 Server rear panel includes communication ports, I/O ports, AC power connector, and

the locator LED/button. Additional LEDs located on the rear panel of the hp Integrity rx1600 Server signal

the operational status of:

• Optional Management Processor Card LAN

•PCI Slots 1 and 2

Figure 3-5 Rear View

Table 3-4 Rear Panel Connectors and Switches

Connector/Switch Function

AC Power Primary power connection for the server.

LVD/SE SCSI 68-pin, low-voltage differential, single-ended U320 SCSI. This connector provides

external SCSI connection on SCSI Channel B.

10/100/1000 LAN 10/100/1000 base-T ethernet LAN connector.

10/100 LAN 10/100 base-T ethernet LAN connector Wake-on-LAN, Alert-on-LAN capabilities

Serial 9-pin male serial connector—this is the console connector if the optional

management processor card is not installed.

USB Two universal serial bus (USB 2.0) connectors.

ToC Transfer of control button. Halts all system processing and I/O activity and

restarts the computer system.

AC Power

Receptacle

LVD/SE SCSI

10/100/1000

LAN

10/100

LAN

USB

PCI Slot 1

PCI Slot 2

Serial

Locator Button

and LED

ToC

10/100 Video Serial

LAN

Optional

Management Board

Connectors