Installation Guide, Second Edition - HP Integrity rx1600

Chapter 3

Installing and Configuring

Installing Additional Memory

Step 12. Replace the cover.

Step 13. Verify that the newly installed processor works:

•Run the info cpu command at the EFI shell prompt, or

•Run cpu diag from Offline Diagnostic CD for full functional check.

Installing Additional Memory

The hp Integrity rx1600 Server has 8 memory sockets for installing DDR SDRAM memory modules. These

memory modules can either be 256MB, 512MB, 1GB, or 2GB size. The system supports combinations from

512 MB up to 16GB.

Supported DIMM sizes

Supported DIMM sizes are 256MB, 512MB, 1GB, 2GB. Dissimilar DIMM sizes may be used in any available

slot pairs but all DIMMs in each pair must match.

Paired DIMM slots are:

• Pair 1 = DIMM Slot 0A and 0B

• Pair 2 = DIMM Slot 1A and 1B

• Pair 3 = DIMM Slot 2A and 2B

• Pair 4 = DIMM Slot 3A and 3B