Read Me First: Replacing the Base Unit

Printed in the U.S.A.

Replacing the Base Unit

Use this checklist to verify all parts from the original system have been moved to the replacement base unit.

NOTE Be sure to copy PRODUCT NUMBER, SERIAL NUMBER and UUID values onto the blank

labels and apply them to the system product information label on the base unit.

Figure 1 Location of Components of Base Unit

PCI I/O Backplane

Assembly

DIMMs

CPU(s)

CPU Power Pod(s)

Management Processor card

Power Supply Fans

Power Supply

DVD filler if no DVD

Hard Disk

Drive (HDD)

Display Panel

DVD or

CD-RW/DVD

Chassis Fans

Management

Processor Filler

(on rear panel)

HDD filler if no HDD

CPU Airflow guide

(single CPU config.)

System

Product

Information

Label

PAGE 1
Replacing the Base Unit Use this checklist to verify all parts from the original system have been moved to the replacement base unit. NOTE Be sure to copy PRODUCT NUMBER, SERIAL NUMBER and UUID values onto the blank labels and apply them to the system product information label on the base unit. Figure 1 Location of Components of Base Unit Management Processor card DIMMs CPU Power Pod(s) CPU Airflow guide (single CPU config.
PAGE 2
Step 1. Remove the following components from your existing base unit. Refer to sections of the Operation and Maintenance Guide, included on the hp Server Documentation CD-ROM for component removal instructions.