hp Integrity rx1600 Site Preparation Guide Regulatory Model Number: RSVLA-0302 Version 2.0 Manufacturing Part Number: rx1600_siteprep January 2004 U.S.A. © Copyright 2004 Hewlett-Packard Development Company, L.P..
Legal Notices Copyright Notices. © Copyright 2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Contents 1. About This Document What’s in This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Typographical Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HP Encourages Your Comments . . . .
Contents Operational Space Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Floor Plan Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conversion Factors and Formulas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conversion Factors . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figures Figure 2-1. hp Integrity rx1600 Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 2-2. Airflow through hp Integrity rx1600 Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 3-1. Raised Floor Metal Strip Ground System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 3-2. Delivery Survey (Part 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figures 6
1 About This Document This document describes how to prepare your site for installation of your hp Integrity rx1600 Server, Regulatory Model Number: RSVLA-0302. The document printing date and part number indicate the document’s current edition. The printing date will change when a new edition is printed. Minor changes may be made at reprint without changing the printing date. The document part number will change when extensive changes are made.
About This Document HP Encourages Your Comments The CD will autorun when you insert it into a Windows workstation, or, point your browser at the index.htm file located under the Start directory of the CD. All users, including UNIX/Linux, can access a complete manual set by viewing the directory manuals. The manuals are in Adobe Acrobat Reader (pdf) format. IMPORTANT The latest version of this document can be found online at http://docs.hp.com.
About This Document Where to Get Help • How many processors, DIMMs, and PCI cards have been installed? • What versions of processor, memory, and PCI cards are used and where are they installed? • What accessories are installed? Step 4.
About This Document Where to Get Help 10 Chapter 1
2 System Specifications System Configuration The following table lists the minimum and maximum configurations for an hp Integrity rx1600 Server. Table 2-1 Minimum/Maximum Configuration System Name Minimum Maximum CPU 1 2 Power Supplies 1 1 Memory 512MB 16GB Optional Internal Disks 1 HotPlug HD @36GB 2 HotPlug HD @146GB - Total 292GB Optional Internal Media 0 1 DVD ROM, CD-ROM.
System Specifications Dimensions and Weights Dimensions and Weights This section provides dimensions and weights of hp Integrity rx1600 Server components. Component Dimensions Table 2-2 Server Component Dimensions Dimension Value Height-Inches (Centimeters) 1.75 (4.5) Width-Inches (Centimeters) 17.32 (44) Depth-Inches (Centimeters) 21.5 (54.6) Weight-Pounds (Kilograms) Unloaded 26 (9.7) Fully loaded <32 (13.
System Specifications Electrical Specifications System AC Power Specifications Power Cords Table 1-3 lists the various power cables available for use with the hp Integrity rx1600 Server system. Table 2-3 Part Number Power Cords Description Country 8120-5341 Pwr Crd C15/S Africa 2.5m BLACK CA ASSY 917 S. Africa 8120-1351 Pwr Crd C13/BS-1363 2.3m BLACK CA ASSY 900 UK & HK & Singapore 8120-1369 Pwr Crd C13/AS-3112 2.0m GRAY CA ASSY 901 Australia 8120-1689 Pwr Crd C13/CEE 7 2.
System Specifications Electrical Specifications System Power Specifications Tables 1-4 lists the AC power requirements for the server. These tables provide information to help determine the amount of AC power needed for your computer room.
System Specifications Environmental Specifications Typical System Configurations The system configurations shown in Table 2-6, Typical Configuration Power Consumption Values, are typical of most systems and show the power and cooling values required for the listed components. These power and cooling values are considered typical and not maximum for the configurations shown.
System Specifications Environmental Specifications Environmental Temperature Sensor To ensure that the system is operating within the published limits, the ambient operation temperature is measured using a sensor placed on the system board. Data from the sensor is used to control fan speed and also to initiate system overtemp shutdown. Nonoperating Environment The system is designed to withstand ambient temperatures between -40° C to 70° C under nonoperating conditions.
System Specifications Environmental Specifications Figure 2-2 Airflow through hp Integrity rx1600 Server Acoustic Noise Specification The acoustic noise specification for the HP Server is as follows: • 6.
System Specifications Environmental Specifications 18 Chapter 2
3 General Site Preparation Guidelines The following information provides general principles and practices to consider before the installation or operation of an hp Integrity rx1600 Server. Electrical Factors NOTE Electrical practices and suggestions in this guide are based on North American practices. For regions and areas outside North America, local electrical codes will take precedence over North American electrical codes.
General Site Preparation Guidelines Electrical Factors Most computer room installations are equipped with the following fire protection devices: • Smoke detectors • Fire and temperature alarms • Fire extinguishing system Additional safety devices are: • Circuit breakers • An emergency power cutoff switch • Devices specific to the geographic location for example, earthquake protection Lighting Requirements for Equipment Servicing Adequate lighting and utility outlets in a computer room reduce the
General Site Preparation Guidelines Electrical Factors Sources of Voltage Fluctuations Voltage fluctuations, sometimes called glitches, affect the quality of electrical power.
General Site Preparation Guidelines Electrical Factors Raceway Systems (electrical conduits) (LAHJ) Raceways (electrical conduits) form part of the protective ground path for personnel and equipment. Raceways protect the wiring from accidental damage and also provide a heatsink for the wires.
General Site Preparation Guidelines Electrical Factors NOTE The green wire ground conductor mentioned above may be a black wire marked with green tape (LAHJ). Computer Safety Ground Ground all computer equipment with the green (green/yellow) wire included in the branch circuitry. The green (green/yellow) wire ground conductors should be connected to the appropriate power panel and should be sized per applicable codes (based on circuit over current device ratings).
General Site Preparation Guidelines Electrical Factors • Better— A grounded #6 AWG minimum copper wire grid mechanically clamped to floor pedestals and properly bonded to the building/site ground. • Good—Use the raised floor structure as a ground grid. In this case, the floor must be designed as a ground grid with bolted down stringers and corrosion resistive plating (to provide low resistance and attachment points for connection to service entrance ground and HP computer equipment).
General Site Preparation Guidelines Electrical Factors System Installation Guidelines This section contains information about installation practices. Some common pitfalls are highlighted. Both power cable and data communications cable installations are discussed. NOTE In domestic installations, the proper receptacles should be installed prior to the arrival of Hewlett-Packard equipment. Refer to the appropriate installation guide for installation procedures.
General Site Preparation Guidelines Environmental Elements Environmental Elements The following environmental elements can affect an hp Integrity rx1600 Server installation: • Computer room preparation • Cooling requirements • Humidity level • Air conditioning ducts • Dust and pollution control • Electrostatic discharge (ESD) prevention • Acoustics (noise reduction) Computer Room Preparation The following guidelines are recommended when preparing a computer room for an hp Integrity rx1600 Ser
General Site Preparation Guidelines Environmental Elements • Reheating • Air distribution • System controls adequate to maintain the computer room within specified operating ranges Lighting and personnel must also be included. For example, a person dissipates about 450 BTUs per hour while performing a typical computer room task.
General Site Preparation Guidelines Environmental Elements Perforated floor panels (available from the raised floor manufacturer) should be located around the front of the system cabinets. Supply air emitted though the perforated floor panels is then available near the cooling air intake vents of the hp Integrity rx1600 Server cabinets.
General Site Preparation Guidelines Environmental Elements Specifically, disk drives, tape drives, and some other mechanical devices can have bearing failures resulting from airborne abrasive particles. Dust may also blanket electronic components like printed circuit boards, causing premature failure due to excess heat and/or humidity build up on the boards. Other failures to power supplies and other electronic components can be caused by metallically conductive particles, including zinc whiskers.
General Site Preparation Guidelines Environmental Elements Electrostatic Discharge (ESD) Prevention Static charges (voltage levels) occur when objects are separated or rubbed together.
General Site Preparation Guidelines Facility Characteristics Facility Characteristics This section contains information about facility characteristics that must be considered for the installation or operation of an hp Integrity rx1600 Server.
General Site Preparation Guidelines Facility Characteristics Table 3-2 Floor Loading Term Definitions (Continued) Term Definition Concentrated load The load that a floor panel can support on a 1-in2 (6.45 cm2) area at the panel’s weakest point (typically the center of the panel), without the surface of the panel deflecting more than a predetermined amount. Ultimate load The maximum load (per floor panel) that the floor system can support without failure.
General Site Preparation Guidelines Space Requirements Table 3-3 Typical Raised Floor Specifications (Continued) Itema Average floor load Rating 500 lb (227 kg) a. From Table 3-2 on page 31 b. With 0.08 in (0.2 cm) of span maximum deflection Windows Avoid housing computers in a room with windows. Sunlight entering a computer room may cause problems. Magnetic tape storage media is damaged if exposed to direct sunlight.
General Site Preparation Guidelines Conversion Factors and Formulas • Cabinets for cleaning materials • Maintenance area and spare parts Floor Plan Grid A floor plan grid is used to plan the location of equipment in the computer room.
General Site Preparation Guidelines Sample of an Installation Schedule Three phase kVA = V × A × √3 ⁄ 1000 • Single phase kVA = V × A ⁄ 1000 Formulas • kVA = Voltage x Current (amps) • Watts = VA x PF • BTU = Watts x 3.
General Site Preparation Guidelines Sample Site Inspection Checklist Sample Site Inspection Checklist Table 3-4 Customer and Hewlett-Packard Information Customer Information Name: Phone No: Street Address: City or Town: State or Province: Country Zip or postal code: Primary customer contact: Phone No.: Secondary customer contact: Phone No.: Traffic coordinator: Phone No.
General Site Preparation Guidelines Sample Site Inspection Checklist Table 3-5 Site Inspection Checklist (Continued) Please check either Yes or No. If No, include comment# or date 9. Is a telephone line available? 10. Are customer supplied peripheral cables and LAN cables available and of the proper type? 11. Are floor tiles in good condition and properly braced? 12. Is floor tile underside shiny or painted? If painted, judge the need for particulate test. Comment or Date Power and lighting No.
General Site Preparation Guidelines Delivery Survey Table 3-5 Site Inspection Checklist (Continued) Please check either Yes or No. If No, include comment# or date No. Area or condition 27. Can cooling be maintained between 20° C and 55° C (up to 5,000 ft.)? Derate 1° C/1,000 ft. above 5,000 ft. and up to 10,000 ft. 28. Can temperature changes be held to 10° C per hour with tape media? Can temperature changes be held to 20° C per hour without tape media? 29.
General Site Preparation Guidelines Delivery Survey Figure 3-2 Delivery Survey (Part 1) DELIVERY CHECKLIST DOCK DELIVERY Is dock large enough for a semitrailer? Yes ___________ No ___________ Circle the location of the dock and give street name if different than address. North West East South STREET DELIVERY Circle the location of access door and list street name if different than address. North West East South List height ___________ and width ___________ of access door.
General Site Preparation Guidelines Delivery Survey Figure 3-3 Delivery Survey (Part 2) ELEVATOR Fill in the following information if an elevator is required to move equipment. Capacity (lb or kg) ________________ Depth ________________ Height ________________ Width ________________ Height Depth Width STAIRS Please list number of flights and stairway dimensions.
Glossary A-B Apparent power A value of power for AC circuits that is calculated as the product of RMS current times RMS voltage, without taking the power factor into account. ASHRAE Standard 52-76 Industry standard for air filtration efficiency set forth by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc. ASL Above sea level. board A printed circuit assembly (PCA). Also called a card or adapter. Btu/h The abbreviation for British thermal units.
Glossary PCA operational continuity. The documents cover both physical requirements including: Space Planning, Temperature, Humidity, Fire, Earthquake, Vibration, Transportation, Acoustical, Air Quality and Illumination; and electrical criteria including: Electrostatic Discharge (ESD), Electromagnetic Interference (EMI), Lightning and AC Power Fault, Steady State Power Induction, Corrosion, DC Potential Difference, Electrical Safety and Bonding and Grounding.
Index A air conditioning system recommendations, 27 air conditioning ducts, 28 air distribution system room space return air, 27 operational space requirements, 33 typical raised floor site, 32 windows, 33 fire protection, 19 floor loading raised floor, 31 B basic air conditioning equipment requirements, 26 basic air distribution systems, 27 G grounding systems, 22 electrical conduit ground, 22 C circuit breaker, 12 computer room safety fire protection, 19 cooling requirements, 26 H humidity level, 28
Index 44
