HP StorageWorks Booting Windows Server 2003 for Itanium-based Systems from a Storage Area Network Application Notes

Switch-base
dzoning
You must be fa
miliar with switch-based zoning. For information about zoning for your environment, see
your switch’s installation guide.
Setting up switch zoning
You must set up switch zoning as part of your configuration. See the figures in "Cabling options for
single-channel HBAs"onpage6and"Cabling options for dual-channel HBAs" on page 9.
Setting up i
nitial zoning
1. Create a zone using the world wide name (WWN) or switch port number that includes the boot HBA
port a n d th
e
controller port.
2. Enable the zone.
Finalizing zoning
1. Modify the initial zone to include the second controller port.
2. Create a zone in the second fabric to include the secondary boot HBA port and the two remaining
controller ports.
Cabling
options for single-channel HBAs
SAN boot
is
supported in the zoned single-channel H BA configurations, as shown in Figure 1 through
Figure 6.
6