Installation Guide, Second Edition - HP Integrity rx1620

Chapter 3

Installing and Configuring

Installing Internal Hard Disk Drives

This section provides information about installing internal hard disk drives.

CAUTION A hot-plug device may require interaction with the operating system before the device can be

safely installed into the server. Verify that the operating system supports installing disk drives

while the operating system is running. If the operating system does not support this feature,

shut down the operating system before attempting this procedure. Failure to observe this

caution will result in system failure.

Figure 3-6 Front View of the hp Integrity rx1620 Server

One additional hard disk drive may be added to your HP Server in slot 1. Always use low profile disk drives

(1.0" height) in your hp Integrity rx1620 Server.

To install an additional hard disk drive, perform the following steps:

Step 1. Remove the slot filler that is installed in slot 1.

LVD HDD 2

Slot 1

LVD HDD 1

Slot 0