Installation Guide, Second Edition - HP Integrity rx1620

Chapter 3

Installing and Configuring

Installing Internal Hard Disk Drives

CAUTION When sliding the hard disk drive into the slot, be careful not to damage the EMI

shielding of the drive. The drive should fit into the slot without excessive use of

pressure.

Figure 3-8Disk Drive Installation in Slot 1

Step 3. Close the drive-ejector handle by pushing it down until it clicks.

Step 4. The hard disk drive is now correctly installed.

Step 5. Validate the hard disk drive installation by:

a. If the server does not have a management processor installed, at the EFI shell prompt input

shell> info io to interrogate the system for proper identification of the drive.

b. If the server has a management processor installed, use the management processor command

MP> df to interrogate the system for proper identification (FRUID) of the drive.