Installation Guide, Second Edition - HP Integrity rx1620

Chapter 3
Installing and Configuring
Installing Processors and Memory
31
Step 8. Use the special processor tool (P/N 5069-5441) shipped with your replacement processor assembly
to lock the processor in place on the system board. To do this, insert the special processor tool into
the lock and rotate it clockwise 180 degrees.
Figure 3-16 Locking the Processor Assembly in Place
IMPORTANT Before proceeding to step 9, make sure the processor is locked in place on the system
board, or the processor will be damaged when the captive screws are tightened.
Step 9. Screw in the four captive screws.
Figure 3-17 Installing the Processor
Front of server
,OCKED
5NLOCKED
Torquing pattern
1
3
2
4
1
2
4
3