Installation Guide, Second Edition - HP Integrity rx1620

Chapter 4

Troubleshooting

LAN LEDs

The front panel LAN LED indicates the system is communicating over the Gigabit or system management

LAN:

• Blinking green, the system is communicating over the LAN.

• Solid green, LAN link is established, no current LAN activity.

Rear Panel LAN LEDs

There are three LAN connectors on the rear panel. They are:

•1Gb LAN A connector

•1Gb LAN B connector

• Optional MP 10/100Mb LAN C connector

LAN A Connector LEDs

The 1Gb LAN A interface provides four LEDs on the rear panel:

LAN B Connector LEDs

The 1Gb LAN B interface provides two LEDs on the rear panel (the LED on the left is not used):

Table 4-22 1Gb LAN A Connector LEDs

LAN LED Location Color State

Not used Top None None

1000mb 2nd from top Amber Blinking amber – the 1000 Mbps with ethernet protocol and

twisted-pair wiring is enabled.

Off – no link.

100mb 2nd from bottom Green Blinking green – the 100 Mbps with ethernet protocol and

twisted-pair wiring is enabled.

Off – no link.

Activity Bottom Green Blinking green – The Activity LED lights, and all other

LEDs are off for a 10 Mbps connection.

Off – no activity

Table 4-23 1Gb LAN B Connector LEDs

Link LED Output

Activity Blinking Orange

Link w/no activity Solid Orange

No link Off