Operations Guide, Fourth Edition - HP Integrity rx1620

10/100/1000 base-T ethernet LAN A 1Gb Connector
The rear panel 10/100/1000 base-T ethernet LAN A 1Gb connector has the following status and
activity LEDs.
Figure 2-5 10/100/1000 base-T ethernet LAN A 1Gb Connector LEDs
Table 2-4 1Gb LAN A Connector LEDs
StateColorLocationLAN LED
NoneNoneTopNot used
Blinking amber – the 1000 Mbps with ethernet protocol and
twisted-pair wiring is enabled.
Off – no link.
Amber2nd from top1000mb
Blinking green – the 100 Mbps with ethernet protocol and
twisted-pair wiring is enabled.
Off – no link.
Green2nd from bottom100mb
Blinking green – The Activity LED lights, and all other LEDs are
off for a 10 Mbps connection.
Off – no activity
GreenBottomActivity
10/100/1000 base-T ethernet LAN B 1Gb Connector
The rear panel 10/100/1000 base-T ethernet LAN B 1Gb connector has the following status and
activity LEDs.
Figure 2-6 10/100/1000 base-T ethernet LAN B 1Gb Connector LEDs
Table 2-5 10/100/1000 base-T ethernet LAN B 1Gb Connector LEDs
OutputLink LED
Blinking OrangeActivity
Solid OrangeLink w/no activity
OffNo link
26 External Connectors