Operations Guide, Fourth Edition - HP Integrity rx1620

15. At the EFI shell prompt, type this command:
reset
The system starts to reboot. This is required to cause the new SCSI setting.
Using the Boot Option Maintenance Menu
This menu allows you to select console output and input devices as well as various boot options.
It contains the following items:
• Boot from a File
• Add a Boot Option
• Delete Boot Option(s)
• Change Boot Order
• Manage BootNext setting
• Set Auto Boot TimeOut
• Select Active Console Output Devices
• Select Active Console Input Devices
• Select Active Standard Error Devices
• Cold Reset
• Exit
These items are described in the following sections.
In all menus, select:
• Help to display the help available for the command
• Exit to return to the main Boot Options Maintenance menu
• Enter to select an item after using the arrow keys to highlight the item
• Save Settings to NVRAM to save your changes
NOTE: The options shown here are examples. Your system may have different options available
based on the system configuration and installed hardware components.
Paths
All devices in the hp Integrity rx1620 Server are represented by paths in the EFI shell. To identify
the correct socket or disk drive, use the following tables.
Table 3-3 hp Integrity rx1620 Server Sockets
PathSocket
Acpi(HWP0002,400)/pci(0|0)1 PCI
Acpi(HWP0003,400)/pci(0|0)2 PCI
Table 3-4 hp Integrity rx1620 Server Drives
PathDrive
Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)SCSI Disk
Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun0,Lun1)SCSI Disk
Acpi(HWP0002,0)/Pci(2|0)/ATA(Primary,Master)Removable Media Boot
Boot from a File
Use this option to manually run a specific application or driver.
Using the Boot Option Maintenance Menu 53