Operations Guide, Fourth Edition - HP Integrity rx1620

This command allows an administrator to add, modify, re-enable, or delete user logins. The
administrator can also enable or disable security warnings and change passwords.
Virtual Front Panel
VFP: Display Virtual Front Panel
The VFP command presents a summary of the system by using direct console addressing. If the
terminal is not recognized by the MP, VFP mode will be rejected. Each individual user will get
this summary in order to avoid issues related to terminal type and screen display mode.
Who
WHO: Displays a list of MP connected users
This command displays the login name and operating mode (Main Menu, command, and so on)
of the connected console client users, and the port on which they are connected. For the LAN
and WEB console clients the remote IP address is also displayed.
If the local console client user did not originate the MP command interface session, there is always
one default user listed for the local serial port: local user i. If the local console operator types
CTRL+B, then the login name that the local operator used is displayed instead.
Exit from MP
X: Exit from MP command interface and disconnect from the system
This command disconnects the executing user from the system. This command is available from
the local port.
Diagnostics
XD: Diagnostics and/or Reset of MP
This command allows the user to perform some simple checks to confirm the MP's health and
its connectivity status. The following tests are available:
• MP Parameter Checksum
• Verify I2C connection (get BMC Device ID)
• LAN connectivity test using ping
• Modem self-tests
Also, the MP can be reset from this command. A MP reset can be safely performed without
affecting the operation of the server.
Management Processor Command Interface 71