Operations Guide, Fourth Edition - HP Integrity rx1620

Command Line Interface Menu
The command line interface (CLI) provides the following menu selections:
• date: Date display
• help: List available commands
• ipmi: Send IPMI cmd
• loc: System locator LED
• passwd: Change password
• pc: Power control
• pr: Power restore policy
• ps: Power status
• rs: System reset (through RST signal)
• sl: Show logs
• sr: Display firmware revisions
• tc: System reset (through INIT signal)
• exit: Exit
Troubleshooting Example Using CLI
This example uses the cli and the SEL to display error messages indicating that no memory is
installed.
cli>sl e
# Sev Generator/Sensor Description Event ID Data, Timestamp
---- - ---------------- ------------ ----------- --------------------------
00A0 - SFW FW error 00-0F:70:40 3F:-- 2003-10-31 22:29:06
00B0 7 CPU0 Mem no DIMMs 000D0 DT 00 0000000000000000
00C0 7 CPU0 Mem no DIMMs 000D0 Time 2003-10-31 22:29:06
00D0 - SFW FW error 00-0F:70:40 3F:-- 2003-10-31 22:29:06
00E0 7 CPU0 Halt boot 00037 DT 04 000000000000000F
00F0 7 CPU0 Halt boot 00037 Time 2003-10-31 22:29:06
Troubleshooting Example Using CLI
This example uses the cli and the SEL to display error messages indicating that fan 2 (memory
fan) has failed.
cli>sl e
# Sev Generator/Sensor Description Event ID Data, Timestamp
---- - ---------------- ------------ ----------- --------------------------
0010 - BMC Chass cntrl 00-12:70:A3 81:03 2003-10-31 22:39:02
0020 - BMC LPC reset 00-12:70:02 2003-10-31 22:39:03
0030 - Fan 1 (PSU) OK 11-0A:07:00 2003-10-31 22:39:04
0040 - Fan 3 (CPU) OK 13-0A:07:00 2003-10-31 22:39:04
0050 - ACPI State S0 (on) FA-22:6F:00 2003-10-31 22:39:05
Command Line Interface 89