Operations Guide, Fourth Edition - HP Integrity rx1620

5 Specifications
This chapter provides the power requirements, physical requirements, and hardware specifications
required for normal operation of the HP Integrity rx1620.
NOTE: For information on operating conditions (environmental requirements), see the hp
Integrity rx1620 Site Preparation Guide included on the HP Server Documentation CD-ROM, or
posted under the rx1620 Server at http://docs.hp.com.
Hardware Specifications
Table 5-1 Hardware Specifications
Intel Itanium (up to 2 processors). 1.3 GHz 3 MB, 1.5 GHz 3 MB.Micro-processors
Supports up to eight Double Data Rate (DDR) registered ECC Memory, in PC1600 DIMMs.
Supported DDR DIMM sizes: 128MB, 256MB, 513MB, 1GB, and 2GB. Requires DIMMs to
be added in pairs of equal capacity.
Memory
Integrated Ultra-3 SCSI dual channel controller; 80 MB/s transfer rate with one internal
68-pin connector (channel A) and one external 68-pin connector (channel B).
SCSI
Two 10Mb/100Mb/1Gb LAN (RJ-45) fast ethernet controller; with Wake-on-LAN
enabled/disabled via BIOS setup.
LAN
Two 64-bit PCI-X slots, 133 MHz, 3.3V slots. One full slot and one half slot.PCI Slots
One serial port, 2 USB 2.0 ports, 2 PCI-X slots, 2 SCSI channels and 1 IDE bus.Core I/O
IDE interface; 48x speed.DVD-ROM
Maximum internal storage: two 146GB, 10K RPM drives.Mass Storage
Optional.External Storage
460W power supply.Power Supply
Dimensions and Weights
This section provides dimensions and weights of hp Integrity rx1620 Server components.
Component Dimensions
Table 5-2 Server Component Dimensions
ValueDimension
1.75 (4.5)Height-Inches (Centimeters)
17 (43)Width-Inches (Centimeters)
21.5 (54.6)Depth-Inches (Centimeters)
Unloaded 26 (9.7)
Fully loaded <32(13.4)
Weight-Pounds (Kilograms)
Hardware Specifications 99