Windows Integrity Cluster Installation and Configuration Guide

9. Verify that you have sufficient administrative rights to install the OS and other software
onto each node.
10. Verify that all of the required hardware is properly installed and cabled (see Figure 2-1).
For information about best practices for this step, go to:
http://www.microsoft.com/technet/prodtechnol/windowsserver2003/library/ServerHelp/
f5abf1f9-1d84-4088-ae54-06da05ac9cb4.mspx
NOTE: Figure 2-1 is an example only. It might not represent the actual cabling required
by your system.
11. Determine all the input parameters required to install your clustered system and record
them in the table in “Gathering Required Installation Information” (page 22). Also see the
Microsoft discussion of this topic at:
http://technet2.microsoft.com/windowsserver/en/library/
f5abf1f9-1d84-4088-ae54-06da05ac9cb41033.mspx?mfr=true
Figure 2-1 Example cluster hardware cabling scheme
Gathering Required Installation Information
Use Table 2-1 to record the input parameters you need to install the OS and configure the cluster.
Record the information in the Value column next to each description.
22 Administering the cluster