Windows Integrity HP Smart Update Manager User Guide

Figure 2-19 Enter Credentials for Group Screen
The screen separates the remaining hosts that still require credentials from the completed hosts.
Each pane is divided into the following columns:
Name Specifies the name of the host.
Status Specifies the credentials status of the host.
DescriptionTextIcon
The component is installed successfully.Entered
The credentials for the host have not been entered.Needs
Credentials
The credentials entered for the host have failed.Credentials
Failed
The host cannot be accessed using the credentials entered, or the host
cannot be found in the network.
Unable to
access host
The host is skipped due to an existing HP Smart Update Manager
session.
Host
Skipped
Due to
Existing
HPSUM
Session
Description Displays the user-defined description given to the host.
To enter the credentials for the host:
1. In the left pane, select the host from the list of hosts requiring credentials. If all credentials
are the same, click Select All to select all the hosts on the list.
2. Click the Enter >> button to enter the required credentials and move the selected host to
the Completed Hosts pane.
3. Click Next to continue.
Selecting bundles to filter on multiple hosts
If the system discovery finds one or more predefined bundles, the Select Bundle Filter screen
(Figure 2-4 (page 15)) appears. For more information about the screen, see “Selecting bundles
to filter” (page 17).
To proceed with the installation process, click OK.
26 ISPs powered by HP Smart Update Manager