Windows Integrity Management Agents Reference

Reconfigure the soft partition containing the CPU
that emitted this event and be sure to give
memory resources to that soft partition before
reset of that partition. Until doing so, this soft
partition will be unbootable and emit this event
on each attempt.
There is no Memory owned by the soft partition
(fPar) whose CPU emitted this event.10936
Look for additional IPMI event logs. Contact your
HP Support Representative to analyze the fabric.
There was a problem while collecting a list of
fabric link info.10937
Fabric information cannot be reported properly.
Collect IPMI Event logs and contact your HP
Support Representative.
An invalid number of fabric vertices was found
while collecting fabric information.10938
Look for additional IPMI event logs. Contact your
HP Support Representative to analyze the fabric.
There was a problem while collecting a list of
fabric link info.10939
Look for additional IPMI event logs. Contact your
HP Support Representative to analyze the fabric.
There was a problem while collecting a list of
fabric link info.10940
Look for additional IPMI event logs. Contact your
HP Support Representative to analyze the fabric.
There was a problem while collecting a list of
fabric link info.10941
Look for additional IPMI event logs. Contact your
HP Support Representative to analyze the fabric.Failed to get a fabric address10943
Capture IPMI event logs. Contact your HP
Support Representative to analyze the fabric link.
System Firmware encountered an unknown fabric
link state10944
Collect IPMI event logs for further details.
Contact your HP Support Representative to
analyze the fabric.
System Firmware was unable to read the fabric
port's FatalError state. The link may or may not
be in error.10945
Collect IPMI event logs. Contact your HP support
representative to investigate the health of the
system.
The fabric data structure may have been
corrupted.10946
Contact your HP support representative to
inspect the fabric and system firmware.
An error occurred while routing the fabric,
possible data corruption or firmware error.11032
Contact your HP support representative to
inspect the fabric and system firmware.
An error occurred while routing the fabric,
possible data corruption or firmware error.11033
Collect IPMI event logs, and contact your HP
support representative to inspect the fabric and
system firmware.An error occurred while routing the fabric11034
Contact your HP support representative to
inspect the fabric and system firmware.An error occurred while routing the fabric11038
Contact your HP support representative to
inspect the fabric and system firmware.An error occurred while routing the fabric11039
Contact your HP support representative to
inspect the fabric and system firmware.An error occurred while routing the fabric11040
Contact your HP support representative to
inspect the fabric and system firmware.An error occurred while routing the fabric11041
Contact your HP support representative to
inspect the fabric and system firmware.An error occurred while routing the fabric11042
11052
Check system backplane.
System backplane power board has reported a
1.2v LDO fault.11452
Check system backplane.
System backplane power board has reported a
2.5v LDO fault.11454
114 Management Agents Event Tables