Windows Integrity Management Agents Reference

Replace DIMMs with duplicate serial numbers.
Ensure new DIMMs have unique serial numbers.Multiple DIMMs have the same serial number.12135
12143
12144
Provide console log containing register dump to
HP Customer Engineer.
Probable bug in System Firmware, EFI driver,
EFI app or OS loader (prior to OS launch). The
event data field contains the IVT offset applicable
to the interrupt. See table 5-7 (Interruption Vector
Table) in the Intel ASDM Volume 2.12149
Provide console log containing register dump to
HP Customer Engineer.
Probable bug in System Firmware, EFI driver,
EFI app or OS loader (prior to OS launch). The
event data field contains the IVT offset applicable
to the interrupt. See table 5-7 (Interruption Vector
Table) in the Intel ASDM Volume 2.12150
On the next reboot, system firmware will test the
specified memory components, and may take
them offline if the errors persist. contact your HP
support representative to check the specified
memory components at your next scheduled
downtime
System firmware has detected and corrected
memory errors. Double chip sparing has been
invoked to help mitigate this condition.12153
Check external clock cable.
External clock cable has been removed from the
CPU cabinet.12155
Collect IPMI event logs. Contact your HP Support
Representative to check the health of the system
fabric.Fabric link errors were encountered12156
Collect IPMI Event logs. Contact your HP Support
Representative to check the fabric subsystem
health.
Fatal errors are present on the cell to crossbar
links12157
Collect IPMI Event logs. Contact your HP Support
Representative to check the fabric subsystem
health.
Errors occurred while collecting error data from
a fabric link12159
Collect IPMI Event logs. Contact your HP Support
Representative to check the fabric subsystem
health.Fatal errors are present on a cell to crossbar link12160
If the data word is not 0x0000000400000000, then
the problem is most likely with the PCI card. If
the value of the data word is 0x0000000400000000,
then check event log with keyword
PCI_ERROR_STATUS. If PCI_ERROR_STATUS
> 1, then the problem is in the connection between
System Bus Adapter and Lower Bus Adapter. If
PCI_ERROR_STATUS = 1, then the problem is in
the Lower Bus Adapter.12161
See event with keyword PCI_LBA_DEV_SPEC_112162
See log with keyword PCI_LBA_DEV_SPEC_1
for more information.12163
Make sure enclosure has the appropriate number
and configuration of power supplies. Reduce
power required by the blade (for instance, remove
some memory or a CPU.) Or, if there are
powered-on blades that are not in use, power
them off.
The enclosure may not have sufficient power for
the new blade12164
Platform Events – Table 2 (Windows System Log Event ID, Cause, Recommended Action) 121