Windows Integrity Management Agents Reference

The Storage Agents service could not write the registry value "%1". The data contains
the error code.
Warning
273
The Storage Agents service encountered a fatal error. The service is terminating. The
data contains the error code.
Error
399
The Storage Agents service version %1 has started.Informational400
Error: Unable to allocate memory. Cause: This indicates a low memory condition.
Rebooting the system will correct this error.
Warning
512
Error: Could not read from the registry subkey. Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.
Warning
513
Error: Could not write the registry subkey: "%1". Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.
Warning
514
Error: Could not read the registry subkey: "%1". Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.
Warning
515
Error: Could not read the registry subkey: "%1". Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.
Warning
516
Error: Could not read the registry subkey: "%1". Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.
Warning
517
Error: Unsupported storage system. Cause: The Proliant storage system %1 is not
supported by this version of the Storage Agents. Upgrade the agents to the latest
version.
Warning
526
The Drive Array Agent storage system table is full.Warning527
The Drive Array Agent failed to get capacity on SCSI drive because SCSI pass through
IOCTL failed.
Warning
574
The Remote Alerter Agent detected an invalid datatype within an alert definition.Warning768
The Remote Alerter Agent detected an error while attempting to log an alert remotely.
The data contains the error code.
Warning
769
The Remote Alerter Agent was unable to log an event in the event log of the system
named %1. The data contains the error code.
Warning
771
The Remote Alerter Agent detected a null handle on initialization. The data contains
the error code.
Error
772
The Remote Alerter Agent received an error on WaitForMultipleObjects call. The
data contains the error code.
Error
773
The Remote Alerter Agent received an error on ResetEvent call. The data contains
the error code.Error774
Drive Array Physical Drive Threshold Exceeded. The physical drive in slot %4, port
%5, bay %6 with serial number "%7", has exceeded a drive threshold.%n [SNMP
TRAP: 3030 in CPQIDA.MIB]Error1061
Drive Array Logical Drive Status Change. Logical drive number %5 on the array
controller in slot %4 has a new status of %2.%n(Logical Drive status values: 1=other,
2=ok, 3=failed, 4=unconfigured, 5=recovering, 6=readyForRebuild, 7=rebuilding,
8=wrongDrive, 9=badConnect, 10=overheating, 11=shutdown, 12=expanding,
13=notAvailable, 14=queuedForExpansion)%n [SNMP TRAP: 3008 in CPQIDA.MIB]Error1062
Drive Array Spare Drive Status Change. The spare drive in slot %4, port %5, bay %6
has a new status of %2.%n(Spare status values: 1=other, 2=invalid, 3=failed, 4=inactive,
5=building, 6=active)%n [SNMP TRAP: 3017 in CPQIDA.MIB]Error1063
Storage Agent Events 143