Windows Integrity Management Agents Reference

Error: Could not write the registry subkey: "%1". Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.Warning1285
Error: Unsupported storage system. Cause: The Proliant storage system %1 is
unsupported by this version of the Storage Agents. Upgrade the agents to the latest
version.Warning1294
Error: Duplicate SCSI port found in slot %1. Cause: The current system ROM may
not support this SCSI controller. You may need to update your system ROM.Warning1343
Error: A version mismatch has been detected with the SCSI device monitor driver
(CPQSDM.SYS). The current driver version is %1. Cause: You may not have rebooted
after a Storage Agents upgrade. Always reboot the system after a installing agents.Warning1344
Error: The SCSI controller on port %1 has been omitted. Cause: The SCSI Agent could
not get the slot data for the controller.Warning1346
Error: The SNMP Agent is unable to genereate traps due to an error during
initialization. Cause: Check to ensure that the SNMP service is running. Reinstalling
the agents may fix this error.Warning1792
Error: The SNMP Agent is older than other components. Cause: The SNMP Agent
is older than the other components of the Storage Agents. Reinstall the entire Storage
Agents package to correct this error.Warning1795
Error: The %1 Agent is older than other components. Cause: The %1 Agent is older
than the other components of the Storage Agents. Reinstall the entire Storage Agents
package to correct this error.Warning1796
Error: Unable to read security configuration information. SNMP sets have been
disabled. Cause: This can be cause by an invalid or missing configuration or by a
corrupt registry. Reinstalling the Storage Agents may correct this problem.Warning1800
Error: Unable to load a required library. Cause: This error can be caused by a corrupt
or missing file. Reinstalling the Storage Agents or running the Emergency Repair
procedure may correct this error.Warning1803
Error: The Storage Agent service is not running. Cause: The SNMP Agent has
determined that the Storage Agent service is not running. Stop the SNMP service
and restart the Storage Agents service. If the error persists, reinstalling the Storage
Agents may correct this error.Warning1806
The Storage SNMP Agent has determined the Storage Agents service is running.Informational1807
Error: The agent could not deliver trap %1. Cause: The agent was unable to use
Asynchronous Management to deliver a trap. This can be caused by a failure in the
Remote Access Service or by a missing or invalid configuration. Use the HP Insight
Management Agents control panel to verify the Asynchronous Management
configuration settings. Use the Network control panel to verify the Remote Access
configuration. If this error persists, reinstalling the Storage Agents or the Remote
Access Service may correct this error. For more information, refer to the Insight
Asynchronous Management documentation.Informational1808
The IDE Agent could not allocate memory. The data contains the error code.Warning3584
The IDE Agent could not open the base of the registry. The data contains the error
code.Warning3585
The IDE Agent could not create the registry subkey: "%1". The data contains the error
code.Warning3586
The IDE Agent could not open the registry subkey: "%1". The data contains the error
code.Warning3587
The IDE Agent could not read the registry value "%1". The data contains the error
code.Warning3588
The IDE Agent found an incorrect type for registry value "%1". The data contains
the type found.Warning3589
150 Management Agents Event Tables