Windows Integrity Management Agents Reference

Reboot or update System FW. If problem persists
contact your HP representative for support.
The system has failed to launch EFI because of
an internal error.5010
Reboot. If problem persists contact your HP
representative for support.
An internal error has caused monarch selection
to fail.5011
Reboot, if problem persists contact your HP
representative for support.
Unexpected error has occurred during monarch
selection.5013
Reboot, if problem persists contact your HP
representative for support.
An internal error has occurred that prevented EFI
from virtualizing.5023
Reboot, if problem persists contact your HP
representative for support.SFW was unable to virtualize PAL.5025
Reboot, if problem persists contact your HP
representative for support.SFW was unable to virtualize SAL.5027
Reboot, if problem persists contact your HP
representative for support.SFW was unable to virtualize SALPROC.5028
Replace CPU. If problem persists contact your
HP representative for support.A CPU has failed the configuration process.5030
Reboot. If problem persists contact your HP
representative for support.A CPU has failed the early configuration process.5031
Replace CPU. If problem persists contact your
HP representative for support.A CPU has failed early self test.5033
Replace CPU. If problem persists contact your
HP representative for support.A CPU has failed.5034
Look for the event "MEM_CORR_ERR" from the
last time the system was running. If you find
these events, replace that DIMM(s) before
replacing the CPU's. Replace DIMMs with
excessive "MEM_CORR_ERR" first. If after
replacing all suspect DIMMs this event is still
seen, replace the CPU.
For ZX1 systems, a Correctable Single Bit Memory
error has caused CPU late self test to fail. It is
possible the CPU is not faulty in this case. For
zx2 systems, the CPU has failed selftest.5036
Increase memory and reboot.Insufficient memory5037
Reboot. If problem persists contact your HP
representative for support.
SFW could not allocate enough memory for EFI
image.5040
Reboot, if problem persists contact your HP
representative for support.EFI image is corrupted.5041
Reboot, if problem persists contact your HP
representative for support.EFI image is not in FIT.5042
Clear NVM, if problem persists contact your HP
representative for support.NVM is corrupted or bad.5045
Reboot, if problem persists contact your HP
representative for support.EFI image is corrupt.5048
Reboot, if problem persists contact your HP
representative for support.EFI image is corrupt.5049
Reboot, if problem persists contact your HP
representative for support.Internal FW error.5050
Reboot, if problem persists contact your HP
representative for support.Internal FW error.5051
Reboot. If problem persists contact your HP
representative for support.An external interrupt has been taken5052
Platform Events – Table 2 (Windows System Log Event ID, Cause, Recommended Action) 67