Windows Integrity Management Agents Reference

Reboot if necessary, if problem persists contact
your HP representative for support.
TheError handler has failed to retrieve or log data
due to a media failure.5159
Contact HP support to troubleshoot the problem.The CEC failed the register test.5160
Check all of the DIMMs in the system and make
sure that they are inserted fully into the slot with
the retention mechanism in place
The DIMM that maps to address 0 is not seated
properly5161
Refer to the user's manual for Memory loading
instructions.
A required DIMM is not loaded in order to allow
for proper operation of the DIMM specified in
the physical location.5171
Contact HP Support personnel to troubleshoot
the problemThe DIMMs SPD EEPROM got corrupted.5172
Reseat or replace the DIMM. If problem persists,
contact HP Support personnel to troubleshoot
the problemDetection of SPD error type - various types5173
Contact HP Support personnel to troubleshoot
the problemA DIMM with an invalid DIMM type was found5174
Contact HP Support personnel to troubleshoot
the problem
The DIMMs in the rank do not have the same
DIMM type5175
Reduce the number of different types of DIMMs
in the system.Too many different types of DIMMs in system5176
Reload System Firmware. Contact HP Support
personnel to troubleshoot the problemProbable internal FW error5179
Contact HP support personnel to troubleshoot
the problemThe CEC failed MBE detection.5180
Contact HP support personnel to troubleshoot
the problemThe CEC failed MBE detection.5181
Contact HP support personnel to troubleshoot
the problemThe CEC failed SBE detection.5182
Contact HP support personnel to troubleshoot
the problemThe CEC failed SBE detection.5183
No action is needed if FW recovers. If system will
not boot, contact HP support to troubleshoot the
problem.FW detected memory errors below 1MB.5185
Contact HP support to troubleshoot the problem.
The address logged in the CEC doesn't map to a
memory rank, possibly due to a SFW error or
NVM corruption5186
Contact HP support to troubleshoot the problemSoftwareError or CEC error5187
Contact HP support to troubleshoot the problemSFWError or CEC error5189
Contact HP support to troubleshoot the problemSFW error or CEC error5190
Refer to the user's manual for Memory loading
instructions.
A required DIMM is not loaded in order to allow
for proper operation of the DIMM specified in
the physical location.5191
Contact HP support to troubleshoot the problem.Corrupt NVM or System firmware failure5193
Unspecified5199
Contact HP support to troubleshoot the problem.
DIMM(s) that map into low memory have errors
on them.5202
Contact HP Support personnel to troubleshoot
the problemMultiple bit error in DIMM5204
Platform Events – Table 2 (Windows System Log Event ID, Cause, Recommended Action) 71