Windows Integrity Management Agents Reference

See earlier error event.See earlier error event.5619
Utilities may be unavailable to update the
profiles. Check the connections are reset.5621
Run parmgr to configure the cell into a PD and
reset the PD or add the cell.5622
Rearrange the DIMMs to follow the loading order
specified in the Maintenance and Operation
Manual
The current DIMM loading order does not follow
the guidelines in the user manual5623
PD Rendezvous Boot Rules: If greater than 50%
of the assigned cells are rendezvoused, we will
boot. If less than 50% of the assigned cells are
rendezvoused, don't boot. If exactly 50% of the
assigned cells are rendezvoused, including all of
the preferred core cells, we will boot. If exactly
50% have rendezvoused, and there is a specified
preferred core cell not rendezvoused, don't boot.
If exactly 50% have rendezvoused, and there are
no preferred core cells, don't boot. If any of the
above apply in preventing the boot. Reconfigure
the PD and reboot.5626
Reboot if necessary, if problem persists contact
your HP representative for support.A processor has failed rendezvous.5638
Reboot if necessary, if problem persists contact
your HP representative for support.
SFW's Machine Check Handler was unable to log
or clear I/O error registers.5646
Analyze Machine Check Logs using diagnostic
tools and EFI tools.Cannot escalate an MCA to BERR.5655
Analyze Machine Check Logs using diagnostic
tools and EFI tools.Cannot escalate an MCA to BINIT.5656
Update firmware to get newer PAL that support
the PAL_GET_FEATUREs call.SFW failed to get the feature set from PAL5657
Review error logs to determine cause of MCA. If
problem persists, contact HP support to
troubleshoot the problem.
PAL Failed to rendezvous the processors during
a MCA.5658
update newer system firmware with the new PAL
that support the PAL_SET_FEATURES call.SFW failed to set the feature set from PAL.5659
Reboot if necessary, if problem persists contact
your HP representative for support.A slave failed to rendezvous.5677
Reboot if necessary to re-register vector, if
problem persists contact your HP representative
for support.A bad rendezvous vector has been registered.5679
Just a warning that software or OS is making a
call when it shouldn't. SFW will ignore the call
when this happen. Need to fix OS or software to
not make the SAL_MC_RENDEZVOUS when
there is no monarch processor chosen.
Software is making a SAL_MC_RENDEZVOUS
call when it shouldn't.5682
OS or Software needs to be fixed to register a
wake-up mechanism before calling
SAL_MC_RENDEZ.
OS or Software is calling SAL_MC_RENDEZ
without registering a method to wake-up the
processor.5683
Update SFW with contain a new PAL that
support this feature. If no new PAL that support
this feature, no action should be taken further.
PAL does not support the call to escalate further
local MCA to global MCA.5684
Update system firmware with a new PAL that
support the PAL_GET_FEATURES call.
PAL does not support call to get the processor
feature set during processor rendezvous.5685
78 Management Agents Event Tables