Windows Integrity Management Agents Reference

Check for other errors in the system first.
Invalidate NVM and retry to boot. Get the latest
firmware release.
Unable to properly initialize a system firmware
node5728
Contact system firmware team.
This is likely to be a symptom of an earlier
problem, or the system is out of malloc space.5729
This is usually a symptom of an earlier problem.
Check to be sure the pdh node was initialized
into the tree correctly.5730
This is usually due to a memory allocation
problem. Verify that sram is usable and there is
memory available.5731
May be out of malloc space or a previous tree
error prevented this from being successful. Check
for earlier errors.5732
Possibly out of memory or an earlier error left
the tree in an unusable state.5733
Replace processors with compatible ones if all
processors are to be used.
Installed processors are not of compatible models
or families5734
Replace processors with compatible ones if all
processors are to be used.
Processors with different cache sizes are installed
in the system.5735
No action is required. FW takes action
automatically. To avoid this event, be sure that
the monarch processor is the lowest stepping of
processor in the system.
The monarch processor was not the lowest
stepping processor installed within the cell.5737
No action is needed. If problem persists, update
System FW or contact your HP representative for
support.
The monarch processor has a stepping that is
greater than a slave processor installed in the
system.5738
If multiple CPU's report this issue, check the
BMC. If only one reports this issue, replace the
CPU. If problem persists, contact HP support.
FSB speed faster than the capabilities of the
processors5740
Reboot. If problem persists contact your HP
representative for support.An early version of CPU or a bad info ROM.5741
Contact your HP representative for support.PAL_A has not been executed.5742
Contact your HP representative for support.PAL_B has not been executed.5743
Replace CPU with a production CPU.A Prototype CPU is installed.5744
Reboot, if problem persists, replace CPU.
A watchdog timer has expired and determined
that a monarch is dead.5745
A CPU failed supplemental selftests. Replace the
offending CPU.5746
Reset partition, and check hardware associated
with event data.Possibly bad link or cell connection.5747
Reset cellFirmware error5749
Reset the BMC using the 'rb' command from the
MP. If this doesn't work (or no MP available),
unplug power from the system for 10 seconds
and try rebooting the system.The communication with the system ID is lost5750
Unplug power from the system for 10 seconds
and try rebooting the system.BMC failure5751
80 Management Agents Event Tables