Windows Integrity Management Agents Reference

Specify a valid parameter.8882
Clear NVRAM.8883
Check CC.link failure between the XBC and the CC8894
Contact HP Support personnel to analyze the
fabric.Fabric Access Failure.8895
Contact HP Support personnel to analyze the
fabric.CSR Read/Write error8896
Contact HP Support personnel to analyze the
fabric.Fabric AccessError.8897
Contact HP Support personnel to analyze the
fabric.CC CSR access failure.8898
Contact HP Support personnel to analyze the
fabric.CC CSR Access Failure.8900
The MP is not functioning or the PDHC cannot
communicate with it. Reset the MP.8906
Contact the Response Center to report defect
Upgrade PDC firmwareSystem Firmware design or code bug is likely.8924
Contact HP Support personnel to analyze the
fabric.Fabric AccessError.8926
Check XBC, Backplane, Flex Cables, Contact HP
Support Personnel for further troubleshooting.
Most likely a hardware problem, but confirm the
cause by looking at the return status.8930
Look for additional chassis codes to provide
detail. Check XBC, Backplane, Flex Cables,
Contact HP Support Personnel.
Fabric Access problem. Either an error reading
the hardware or XBC Key contention.8931
An unanticipated error occurred. Contact HP
Support personnel to analyze the IPMI FPL log.8936
Firmware problem. Contact HP Support
Personnel.8939
If in manufacturing, reprogram the partition
specific field of the CPU module(s) FRU
EEPROM. Otherwise, contact HP support
personnel to troubleshoot the unreported CPU
module.
The CPU module(s) that are installed have invalid
data stored in the partition specific field of the
FRU EEPROM.8940
Contact HP support personnel to troubleshoot
the CPU modules on the Cell.
At least one of the installed CPU modules are
incompatible with at least one other CPU module.8941
Contact HP support personnel to troubleshoot
the CPU module.
The CPU module is not an HP CPU module, or
the FRUID data for this CPU module has not been
programmed.8942
It needed to be replaced.The Cell Battery is low.8954
Contact HP Support personnel to analyze the
fabric.Error accessing XBC CSRs.8959
Fabric AccessError, XBC Key Disabled. Check
XBC, links, backplane, Contact HP Support
Personnel for further troubleshooting.8960
Fabric AccessError. Check XBC, Check links.8962
Contact HP Support personnel to analyze the
fabric.Fabric AccessError. Couldn't write this XBC.8964
Contact HP Support personnel to analyze the
fabric.
Fabric AccessError. Couldn't read or write this
XBC.8965
96 Management Agents Event Tables