hp workstations zx6000, hp server rx2600 - operation and maintenance guide

ManualsBrandsHP ManualsServerHP Integrity rx2600 Server

101

102

103

104

105

106

107

108

109

110

System Conﬁguration

Extensible Firmware Interface (EFI)

Chapter 3

102

Select Active Console Output Devices

The menu item Select Active Console Output Devices provides the following

selections:

The menu items listed with an asterisk beside them are active consoles.

Note that before one VGA device can be selected, an existing VGA device must be

deselected in the Select Active Console Output Devices submenu.

NOTE For Linux® the UART selection mode in the table in this section speciﬁes which serial

port becomes ttyS0 on the system. It is recommended that you select only one UART

from the table.

Select Active Console Input Devices

The menu item Select Active Console Input Devices provides the following

selections:

The menu items listed with an asterisk beside them are active devices.

NOTE For Linux® the UART selection mode in the table in this section speciﬁes which serial

port becomes ttyS0 on the system. It is recommended that you select only one UART

from the table.

EFI Boot Maintenance Manager ver 1.10 [14.57]

Select the Console Output Device(s)

Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(PcAnsi)

Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100)

* Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+)

Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(VtUtf8)

* Acpi(HWP0002,400)/Pci(1|0)

Save Settings to NVRAM

Exit

Active Output Device. Active Standard Error Device.