hp workstations zx6000, hp server rx2600 - operation and maintenance guide

System Configuration
Extensible Firmware Interface (EFI)
Chapter 3
103
Select Active Standard Error Devices
You can only select one VGA device for normal and error output. When multiple input
consoles are chosen, all of them are active which means you can enter text from any of
them at any time.
The menu item Select Active Standard Error Devices provides the following
selections:
The menu items listed with an asterisk beside them are active devices.
Note that before one VGA device can be selected, an existing VGA device must be
deselected in the Select Active Console Error Devices submenu.
Security/Password Menu
This section covers the Security/Password Menu. This menu allows you to change the
administrator and user passwords. When you select one of these menu items, you will be
provided with another menu from which to select your choice of options. Subsequent
sections show these menus.
Set Administrator Password
The menu item Set Administrator Password provides the following selections:
EFI Boot Maintenance Manager ver 1.10 [14.57]
Select the Standard Error Device
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(PcAnsi)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100)
* Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(VtUtf8)
* Acpi(HWP0002,400)/Pci(1|0)
Save Settings to NVRAM
Exit
Active Output Device. Active Standard Error Device.
EFI Security/Password Menu
Security Menu. Select an Operation
Set Administrator Password
Set User Password
Exit
EFI Security/Password Menu
Administrator Password. Select an Option
Set Administrator Password
Enable/Disable Password
Help
Exit