hp workstations zx6000, hp server rx2600 - operation and maintenance guide

System Conﬁguration

Management Processor (MP)

Chapter 3

120

6. Watch the Management Card boot the MP command mode prompt. You will see the

following information displayed on the screen:

HP Management Processor

Firmware Revision kdEv1026 Oct 26 2001,10:28:32

Type Ctrl-B to activate the MP Command Interface

7. Press Ctrl-B, and respond to the login prompt by pressing Enter. Respond to the

password prompt by pressing Enter. The follow information is displayed:

Hewlett-Packard Management Processor

System Name: fstl3a

********************************************************************

MP ACCESS IS NOT SECURE

No MP users are currently configured and remote access is enabled.

Set up a user with a password (see SO command)

Disable all types of remote access (see EL and ER commands)

*********************************************************************

MP Host Name: fstl3a

MP>

8. Enter “he” at the MP prompt. This will give you access to information regarding

MP’s commands and help topics. The following menu is displayed:

==== MP Help ======================================================

MP Help System

Enter a command at the help prompt:

OVerview : Launch the help overview

LIst : Show the list of MP commands

<COMMAND> : Enter the command name for help on individual

command

TOPics : Show all MP Help topics and commands

HElp : Display this screen

Q : Quit help

====

MP HELP: <selection>

Where <selection> is one of the items from the menu.