hp workstations zx6000, hp server rx2600 - operation and maintenance guide

System Configuration
Management Processor (MP)
Chapter 3
122
5. Enter the new IP address. To do this, type “<IP_Address>” and press Enter in
response to the follow prompt:
Enter new IP Address: <IP_Address>
<IP_Address>
New IP Address: <IP_Address>
Confirm? (Y/[N])
6. Confirm that the new IP address is correct. To do this, type “y” and press Enter in
response to the following prompt:
Confirm? (Y/[N]) y
y
-> IP Address will be updated.
Current MP Host Name: myhost
Do you want to modify it? (Y/[N])
7. Change the current MP Host Name for your system. To do this, type “y” and press
Enter in response to the following prompt:
Do you want to modify it? (Y/[N]) y
y
Current MP Host Name: myhost
Do you want to modify it? (Y/[N])
8. Enter the MP Host Name. To do this, type “<new_host_name>” and press Enter in
response to the following prompt:
Enter new MP Host Name: <new_host_name>
<new_host_name>
New MP Host Name: <new_host_name>
Confirm? (Y/[N])
9. Confirm that the new MP Host Name is correct. To do this, type “y” and press Enter
in response to the following prompt:
Confirm? (Y/[N]) y
y
-> MP Host Name will be updated.
Current Subnet Mask: 200.0.0.0
Do you want to modify it? (Y/[N])
10. Change the current Subnet Mask for your system. To do this, type “y” and press
Enter in response to the following prompt:
Do you want to modify it? (Y/[N]) y
y
Enter new Subnet Mask: