hp workstations zx6000, hp server rx2600 - operation and maintenance guide

System Configuration
Management Processor (MP)
Chapter 3
123
11. Enter the Subnet Mask. To do this, type “<new_subnet_mask>” and press Enter in
response to the following prompt:
Enter new MP Host Name: <new_subnet_mask>
<new_subnet_mask>
New MP Host Name: <new_subnet_mask>
Confirm? (Y/[N])
12. Confirm that the new Subnet Mask is correct. To do this, type “y” and press Enter in
response to the following prompt:
Confirm? (Y/[N]) y
y
-> Subnet Mask will be updated.
Current Gateway: 127.0.1.0
Do you want to modify it? (Y/[N]) (Default will be IP Address)
13. Change the current Gateway for your system. To do this, type “y” and press Enter in
response to the following prompt:
Do you want to modify it? (Y/[N]) (Default will be IP Address) y
y
Enter new Gateway:
14. Enter the Gateway. To do this, type “<new_gateway>” and press Enter in response to
the following prompt:
Enter new MP Host Name: <new_gateway>
<new_gateway>
New MP Host Name: <new_gateway>
Confirm? (Y/[N])
15. Confirm that the new Gateway is correct. To do this, type “y” and press Enter in
response to the following prompt:
Confirm? (Y/[N]) y
y
-> Gateway will be updated.
Current Web Console Port Number: 2023
Modifying Web Port number will cause all present Web
connections to be dropped.
Do you want to modify it? (Y/[N])
16. Change the current Web Console Port Number for your system. To do this, type “y”
and press Enter in response to the following prompt:
Do you want to modify it? (Y/[N]) y
y
Valid Web Port numbers: 23, 2000-2400
Enter new Web Console Port Number: