hp workstations zx6000, hp server rx2600 - operation and maintenance guide

System Configuration
Management Processor (MP)
Chapter 3
128
Server Control Commands
This set of commands can be used to alter the state of the server. See Table 3-4.
General MP Configuration Commands
This set of commands allows you to perform some general configurations, such as,
configuring automatic system restart, setting the default configuration, etc. See
Table 3-5.
Table 3-4 Server Control Commands
Command Description
MR Modem reset
PC Remote power control
RS System reset from RST signal
TC Transfer of control; system reset through INIT signal
Table 3-5 General MP Configuration Commands
Command Description
AC Alert display configuration
BP Reset BMC password
CE Log a chassis code in the GSP chassis code history buffer
CG Generate RSA key pair of Self Signed Certificate
CT Configure tracing into GSP firmware
DC Default configuration
EX Exit from the MP command mode
HE Prints a Help menu
IT Modify MP inactivity timeout
LOC Locator LED
OT Disable over temperature control
PR Power Restore Policy Configuration
RB BMC reset through Toggle GPIO pin
SDM Set display mode (hex or text)
SO Security options and access control
VT View trace buffer
XD MP diagnostics and reset
XU Upgrade the MP firmware
ZCTGNAYOR Clear GSP NVM at your own risk