hp workstations zx6000, hp server rx2600 - operation and maintenance guide

System Configuration
Management Processor (MP)
Chapter 3
129
MP Port Configuration Commands
This set of commands allows you to configure LAN/WEB, remote/modem, and local ports.
See Table 3-6.
CAUTION If you are not connecting anything to a port, hardware flow control should be off.
Connections Commands
This set of commands provides a means for examining and making connections or
changing mode. See Table 3-7.
ZDTPMT Dump the GSP internal postmortem trace
Table 3-5 General MP Configuration Commands (Continued)
Command Description
Table 3-6 MP Port Configuration Commands
Command Description
CA Configure serial port parameters
EL Enable LAN access options: telnet and web permissions
ER Enable remote; modem access configurations
LC Configure the LAN
PG Configure paging
Table 3-7 Connections Commands
Command Description
CO Return to the redirected console mode
CSP Connect to another service processor
DI Disconnect remote or LAN connection
SE Activate a system session on locator remote port
TE Send message to other user
WHO Display a list of connected users