hp workstations zx6000, hp server rx2600 - operation and maintenance guide

Product Information
System Description
Chapter 1
14
System Description
The following table provides an overview of the system.
Feature Description
Processor(s) Systems can be operated with one or two Intel® Itanium® 2
processors
Cache Memory
(integratedinprocessor
package)
• Level 0: 16KB
• Level 1: 256KB
• Level 2: 3MB (1.5MB with 900MHz processor)
Internal Processor
Clock Speed Options
900MHz or 1GHz
Chipset HP scalable processor chipset ZX1, including a Processor Dependent
Hardware interface, AGP/PCI-X host controller and Memory
Controller
System Firmware 8MB Flash EEPROM
Operating System HP-UX and Linux® Operating Systems
Main Memory Twelve DIMM sockets that support 256MB, 512MB and 1GB DDR
SDRAM memory modules.
The order in which you install the memory modules is important.
For information on the installing memory, see the section “Removing
and Replacing Memory” in Chapter 2 of this document. You can
install a minimum of 512MB (1GB for rx2600s) of memory and a
maximum of 12GB.
Mass Storage Four shelves, supporting:
• One front-access, slimline optical drive.
• Three 3 1/2-inch hard disk drives (1-inch height)
SCSI Controller 66MHz, 64bit PCI based two-channel Ultra 160 SCSI host controller.
IDE Controller Includes an integrated Ultra ATA-100 capable controller that
supports one optional slimline optical drive.
Graphics Controllers
for zx6000 not built in
ATI Radeon 7000 and ATI FireGL4 are supported by the HP-UX
operating system. ATI Radeon 7000, nVIDIA Quadro2 EX and
nVIDIA Quadro4 900XGL are supported by the Linux operating
system.