hp workstations zx6000, hp server rx2600 - operation and maintenance guide

Troubleshooting
Running Support Tools Manager (HP-UX only)
Chapter 4
142
Running Support Tools Manager (HP-UX only)
HP-UX uses an online diagnostics product called the Support Tools Manager (STM) that
allows system operation verification.
Three interfaces are available with the Support Tools Manager: a command line
interface (accessed through the cstm command), a menu-driven interface (accessed
through the mstm command), and the graphical user interface (accessed through the
xstm command).
For more information on these user interfaces, see the online man pages by entering the
following at a command line prompt:
man cstm [Enter]
man mstm [Enter]
man xstm [Enter]
For information on the enhanced online diagnostics, see the “Support Tools for HP
Computers” documents located at this URL:
http://docs.hp.com//hpux/diag/
To access the Support Tools Manager, perform the following steps:
1. In a terminal window, type the following at the fs0:\> prompt to invoke the
command line interface:
fs0:\> cstm [Enter]
2. The following message appears:
Support Tool Manager Version A.01.00
Type ‘help’ for a list of available commands.
CSTM>
3. To verify the system operation, type the following at the CSTM> prompt:
CSTM> verify all [Enter]
Messages similar to the following appear:
Verification has started on device (CPU).
Verification has started on device (FPU).
CSTM> Verification of (FPU) has completed.
CSTM> Verification of (CPU) has completed.
4. Press [Enter] to return to the CSTM> prompt after all test results are reported.
5. To exit the Support Tools Manager, enter the following:
CSTM> exit [Enter]