hp workstations zx6000, hp server rx2600 - operation and maintenance guide

Troubleshooting
Running Event Monitoring Service
Chapter 4
144
Once the EMS hardware monitor is installed, you need to get it running. To get the
hardware monitor running, start the Hardware Monitoring Request Manager and
enable monitoring. This is done by executing the following command at the shell prompt:
/etc/opt/resmon/lbin/monconfig
The opening screen looks similar to this:
========================================================
========== Event Monitoring Service ==========
========== Monitoring Request Manager ==========
========================================================
INDICATES
EVENT MONITORING IS CURRENTLY ENABLED <== MONITORING
STATUS
========================================================
====== Monitoring Request Manager Main Menu ========
========================================================
Select:
(S)how current monitoring requests configured via monconfig
(C)heck detailed monitoring status
(L)ist descriptions of available monitor
(A)dd a monitoring request <== MAIN MENU
(D)elete a monitoring request SELECTION
(M)odify an existing monitoring request OPTION
(E)nable Monitoring
(K)ill (disable) monitoring
(H)elp
(Q)uit
Enter selection: [s]