hp workstations zx6000, hp server rx2600 - operation and maintenance guide

Troubleshooting
Using the System’s LEDs and e-buzzer to Troubleshoot
Chapter 4
149
Figure 4-6 Desk-side System’s LEDs and Buttons
Power and System LEDs
The power and system LEDs indicate the state of the system. Here is a table of these
states:
LAN LED
The LAN LED provides an indication as to whether the system is communicating over
the LAN. If the LED is not green, the system is off, and it is not communicating over the
LAN. If the LAN LED is on, there is LAN traffic. If the LAN LED is blinking green, the
system is communicating over the LAN.
System
Information
Card
e-buzzer Icon
(hold phone here)
Diagnostic
LEDs
LAN LED
System LED
Power Button
Power LED
Table 4-1
Power LED System LED State
Off Off Off
On (green) Solid green Running
On (green) Off Booting
On (green) Blinking orange (1/sec.) Attention (see section “Diagnostic LEDs”)
On (green) Blinking red (2/sec.) Fault (see section “Diagnostic LEDs”)