hp workstations zx6000, hp server rx2600 - operation and maintenance guide

Troubleshooting
Using the System’s LEDs and e-buzzer to Troubleshoot
Chapter 4
154
Baseboard Management Controller FAULTS (System LED is Blinking RED ●)
Power Supply FAULTS (System LED is Blinking RED ●)
Power Supply WARNINGS (System LED is Blinking ORANGE ●)
LED 1 LED 2 LED 3 LED 4 Fault and Solution
e-buzzer
code
Red
Any
a
Red
Any
a
Baseboard Management Controller
FAULT
7
Red Green Red Off BMC firmware is damaged; replace the
system board; see Chapter 2
7
Red Green Red Green System board field replaceable unit
inventory device is inaccessible; replace
the system board; see Chapter 2
7
a. This LED can display any color other than red (for example, green or off).
LED 1 LED 2 LED 3 LED 4 Fault and Solution
e-buzzer
code
Any
a
Red
Any
a
Red Power Supply FAULT 2
Off Red
Off
Red VRM or power module is not
functioning; see Chapter 2
2
Green Red Off Red Power Supply Unit 1 fault; replace the
power supply; see Chapter 2
2
Off Red Green Red Power Supply Unit 2 fault; replace the
power supply; see Chapter 2
2
Green Red Green Red 12V out ofrange (power supply interface
fault); replace the power supply; see
Chapter 2
2
a. This LED can display any color other than red (for example, green or off).
LED 1 LED 2 LED 3 LED 4 Warning and Suggestion
Any
a
Red
Any
a
Red Power Supply WARNING
Green Red Off Red Power Supply Unit 1 warning;depending on your need
to keep your system from failing you may want to
replace the power supply, or if available, switch to
Power Supply Unit 2; see Chapter 2
Off Red Green Red Power SupplyUnit2 warning; depending on your need
to keep your system from failing you may want to
replace the power supply, or if available, switch to
Power Supply Unit 1; see Chapter 2
a. This LED can display any color other than red (for example, green or off).