hp workstations zx6000, hp server rx2600 - operation and maintenance guide

Event, Error and Warning Messages

Sensor Data Record Repository (SDRR)

Appendix D

234

Events without Sensors

The BMC logs these events with a “sensor number” of 0; there is no matching SDR.

FRU Device Locator Records

These records are used to indicate that some entities should be detected by looking at

their FRU devices. If the FRU inventory device is present, then the entity is present too.

The “device string” in the locator record is also useful to distinguish between entities.

Note: the “Device Type Modiﬁer” byte is used to indicate the FRU data format, as per

[IPMI 1.5] ([IPMI 1.0] says that this byte should be set to 0x00 for a logical FRU device).

Triplet Event data2 data3 Notes

10:70:64 SEL almost full 1F %full The BMC logs this when the SEL is 75%

full

12:70:80 BMC entering special

mode

Mode – Mode is a bit-map:

Bit 0: Shmoo

Bit 1: MfgTest

Bit 2: Shutdown override

Bit 3: Fixed fan speed

Bit 4: Mfg

Bits 7-5: unused, set to 0

12:70:A1 BMC ﬁrmware initializing Major

FW rev

Minor

FW rev

1D:70:00 BMC Cold Reset

1D:70:01 BMC Warm Reset

1D:70:02 BMC Cold Reset after

SDRR update

FRU Format Device Type Modiﬁer

IPMI 0x00

DIMM Memory ID 0x01

FRU Inventory 0x02

System processor cartridge FRU/PIROM (Processor Information ROM) 0x03