hp workstations zx6000, hp server rx2600 - operation and maintenance guide

Installing or Replacing Parts and Accessories

Removing and Replacing the Tower System’s Access Panels

Chapter 2

3. Rotate the blue release handle toward the back of the system and slide the internal

access panel in the direction of the arrow. See Figure 2-4. This gives you access to the

system’s internal components. Note that the system can be serviced in either the

vertical or horizontal orientation (see Figure 2-4 b and c).

Figure 2-4 Removing the Metal Side Cover

CAUTION Both the zx6000 and rx2600 systems depend on the access panels for proper cooling of

internal components. Operating the system with the side cover removed can cause the

system to quickly overheat.

Replacing the Tower System’s Access Panels

1. Align the internal access panel’s front edge with the alignment mark on the optical

drive’s bay area and slide the panel in the direction of the arrow until the cover’s

blue release lever snaps in place. See Figure 2-5.

Figure 2-5 Aligning the Metal Side Cover’s Front Edge with the Alignment Mark

a. Remove Metal Side

b. Access in Vertical

c. Access in Horizontal

Cover

Orientation

Alignment Mark

Metal Side Cover’s Front Edg

Front o

System