hp workstations zx6000, hp server rx2600 - operation and maintenance guide

Installing or Replacing Parts and Accessories
Removing and Replacing the Tower System’s Access Panels
Chapter 2
39
2. Position the left-side panel at approximately 45 degrees and insert the pedestal’s
retaining tabs into the panel’s retaining slots. See Figure 2-6. Rotate the panel
inward until it snaps in place.
Figure 2-6 Replacing the Left-side Panel
3. Reconnect the power cable(s) and turn the system on.
Retaining Tabs
Retaining Slots
Left-side Cover
Pedestal