hp workstations zx6000, hp server rx2600 - operation and maintenance guide

Installing or Replacing Parts and Accessories
Removing and Replacing the Memory Airflow Guide
Chapter 2
45
3. Grasp the memory airflow guide as shown in Figure 2-13 and lift it out of the system.
Figure 2-13 Removing the Memory Airflow Guide
Replacing the Memory Airflow Guide
To replace the memory airflow guide, follow these steps:
1. Turn off the system if it is not already turned off and disconnect all power cables.
2. Remove the system’s access panel(s) if they have not been already removed (refer to
page 37 or page 41 for instructions).
3. Align the guides on both sides of the memory airflow guide with their slots on the
system’s chassis. The slots are highlighted as shown in Figure 2-14. Next, insert the
memory airflow guide in the slots.
Figure 2-14 Replacing the Memory Airflow Guide
4. Replace the system’s access panel(s) (refer to page 37 or page 41). Reconnect all of
the power cables.
Memory Airflow
Guide
Guides
Guide
Slot
Slot
Guides and their highlighted slots
Inserting the memory airflow guide
Memory Airflow Guide
.