hp workstations zx6000, hp server rx2600 - operation and maintenance guide

Installing or Replacing Parts and Accessories
Removing or Replacing an Accessory Card
Chapter 2
50
4. Grasp the PCI/AGP cage’s cover and slide it away from the bulkhead end of the
PCI/AGP cage. Lift the cover off the PCI/AGP cage. See Figure 2-19.
Figure 2-19 Removing the PCI/AGP Cage’s Board Cover
5. Unscrew the bulkhead screw that holds the accessory card in place. Grasp the
bulkhead end of the card and its opposite edge and lift the card out of its connector.
See Figure 2-20.
Figure 2-20 Removing the Accessory Card
PCI/AGP Cage’s Board CoverBulkhead End of PCI/AGP Cage
Bulkhead
Screw
Bulkhead Blank